Molybdenum tube and pipe can be used under temperature up to 1,800 degrees, in components of electron tube, heaters of high-temperature furnaces and thermocouple retainers, etc.

Moly small tubes

Molybdenum tube can also be used as a rotary targets for coating, which is widely used in solar industries.

Edgetech Industries LLC (ETI) provides Moly tube from forged rods and sintering directly. Mo tube with OD smaller than 60mm are mostly machined and gun drilled from forged rod, tube with larger diameter are sintered per size directly. The process methods of Moly tube and crucible are always for saving cost and according to customer’s requirement.

The smallest tube we can carry is 0.187” outer diameter with 0.025” wall thickness, largest can be with 500mm outer diameter. We can also provide TZM alloy tubes and Mo-La alloy tubing, but with a more narrow size range. The hardness of is higher and it’s harder to be machined. Minimum OD for TZM alloy tube and Mo-La tube is 10mm, length will be limited according to OD and wall thickness.

Specification for our Moly tube

Mo tube parts

We can also provide welding Moly tube and riveting tubing that is made by sheet and strip. This kind of large molybdenum tubes are used as molybdenum heat shielding.

Please send us your specifications for molybdenum tube to .

Packaging for our Mo tube

The standard package for Moly tube, TZM Alloy Tube, Mo-La alloy tube is wooden crate, so that the goods can be protected during handling and transportation.